NEW YORK ��As 2013 comes to a close, efforts to revive growth in the world�� most influential economies ��with the exception of the eurozone ��are having a beneficial effect worldwide. All of the looming problems for the global economy are political in character.
After 25 years of stagnation, Japan is attempting to reinvigorate its economy by engaging in quantitative easing on an unprecedented scale. It is a risky experiment: faster growth could drive up interest rates, making debt-servicing costs unsustainable. But Prime Minister Shinzo Abe would rather take that risk than condemn Japan to a slow death. And, judging from the public�� enthusiastic support, so would ordinary Japanese.
By contrast, the European Union is heading toward the type of long-lasting stagnation from which Japan is desperate to escape. The stakes are high: Nation-states can survive a lost decade or more; but the EU, an incomplete association of nation-states, could easily be destroyed by it.
Hot Japanese Stocks To Buy Right Now: Rudolph Technologies Inc.(RTEC)
Rudolph Technologies, Inc. designs, develops, manufactures, and sells process control defect inspection, metrology, and process control software systems to microelectronics device manufacturers. The company provides yield management solutions for use in wafer processing and final manufacturing through a range of standalone systems for macro-defect inspection, test systems, and transparent and opaque thin film measurements. It also offers a range of process control software solutions for semiconductor, solar, and LED manufacturing. It provides products for various applications in the areas of macro-defect detection and classification, diffusion, etch, lithography, CVD, PVD, and CMP. The company sells its products and solutions to logic, memory, data storage, and application-specific integrated circuit device manufacturers. It sells its products in the United States, Taiwan, China, Singapore, South Korea, Japan, and Europe. The company was founded in 1940 and is based in Fla nders, New Jersey.
Advisors' Opinion:- [By John Emerson]
Orbotech (ORBK) and Rudolph Technologies (RTEC) Sizable Net-Nets in the AOI Sector
As noted previously, I rode the elevator up and then back down on Camtek (CAMT), a tiny Israeli automated optical inspection (AOI) company. By late 2008 the company had fallen to below $1 per share. Both of Camtek�� larger rivals, RTEC and ORBK, had dropped to absurdly low levels by November 2008. I used the opportunity to switch out of CAMT and some of my other losing propositions in favor of these superior companies. In the process, I created a large amount of tax loss carry-forwards which would allow me to minimize my future taxation when I decided to sell these cyclical entities.
- [By Seth Jayson]
Basic guidelines
In this series, I examine inventory using a simple rule of thumb: Inventory increases ought to roughly parallel revenue increases. If inventory bloats more quickly than sales grow, this might be a sign that expected sales haven't materialized. Is the current inventory situation at Rudolph Technologies (Nasdaq: RTEC ) out of line? To figure that out, start by comparing the company's inventory growth to sales growth. How is Rudolph Technologies doing by this quick checkup? At first glance, not so great. Trailing-12-month revenue increased 17.6%, and inventory increased 32.2%. Comparing the latest quarter to the prior-year quarter, the story looks potentially problematic. Revenue dropped 8.9%, and inventory grew 32.2%. Over the sequential quarterly period, the trend looks worrisome. Revenue dropped 23.3%, and inventory grew 10.8%. - [By Seth Jayson]
When judging a company's prospects, how quickly it turns cash outflows into cash inflows can be just as important as how much profit it's booking in the accounting fantasy world we call "earnings." This is one of the first metrics I check when I'm hunting for the market's best stocks. Today, we'll see how it applies to Rudolph Technologies (Nasdaq: RTEC ) .
Top 5 Japanese Companies To Watch In Right Now: Templeton Emerging Markets Fund (EMF)
Templeton Emerging Markets Fund (the Fund) is a diversified, closed-end investment company. The Fund seeks long-term capital appreciation by investing at least 80% of its net assets in emerging country equity securities. It makes investments in China, Brazil, South Korea, Turkey, Russia, Thailand, India, Taiwan, Hungary and South Africa. The Fund invests in sectors, such as metals and mining, commercial banks, diversified financial services, semiconductors and semiconductor equipment, wireless telecommunication services, and oil, gas and consumable fuels.
Templeton Asset Management Ltd. (TAML) serves as the Fund�� investment manager. Its administrative manager is Franklin Templeton Services, LLC. The Fund may invest in the Franklin Institutional Fiduciary Trust Money Market Portfolio (the Sweep Money Fund), an open-end investment company managed by Franklin Advisers, Inc. (an affiliate of TAML).
Advisors' Opinion:- [By George Putnam, Editor, New Generation Research, Inc.]
Templeton Emerging Markets Fund (EMF) is also actively managed. Currently, the fund is Asian-centric with about 71% of assets from Asian markets, mostly China and Thailand.
Top 5 Japanese Companies To Watch In Right Now: Cameron International Corp (CAM)
Cameron International Corporation (Cameron), incorporated on November 10, 1994, provides flow equipment products, systems and services to worldwide oil, gas and process industries. Cameron operates in three business segments: Drilling and Production Systems (DPS), Valves & Measurement (V&M) and Process & Compression Systems (PCS). The DPS segment includes businesses, which provides systems and equipment used to control pressures and direct flows of oil and gas wells. The V&M segment includes businesses, which provides valves and measurement systems used to control, direct and measure the flow of oil and gas as they are moved from individual wellheads through flow lines, gathering lines and transmission systems to refineries, petrochemical plants and industrial centers for processing. The PCS segment includes businesses, which provides standard and custom-engineered process packages for separation and treatment of impurities within oil and gas and compression equipment and aftermarket parts and services to the oil, gas and process industries. During the year ended December 31, 2011, it acquired LeTourneau Technologies, Inc. (LeTourneau) from Joy Global Inc. During 2011, it acquired Vescon Equipamentos Industrias Ltda. During 2011, it acquired 51% interest in Newmans Valves. In September 2012, TTS Group ASA sold its drilling equipment business to the Company. Effective August 5, 2013, Cameron International Corp acquired a 75% interest in Douglas Chero SpA, from Consilium SGR SpA.
Drilling & Production Systems Segment
Cameron�� products are employed in a range of operating environments, including basic onshore fields, complex onshore and offshore environments, deepwater subsea applications and ultra-high temperature geothermal operations. The products within this segment include surface and subsea production systems, blowout preventers (BOPs), drilling and production control systems, block valves, gate valves, actuators, chokes, wellheads, manifolds, drilling risers, top drive! s, mud pumps, other rig products and aftermarket parts and services. In addition, the DPS segment designs and manufactures structural components for land and offshore drilling rigs. The segment�� businesses also manufacture elastomers, which are used in pressure and flow control equipment and other petroleum industry applications, as well as in the petroleum, petrochemical, rubber molding and plastics industries. The businesses within this segment market their products directly to end-users through a worldwide network of sales and marketing employees, supported by agents in some international locations. Customers include oil and gas majors, national oil companies, independent producers, engineering and construction companies, drilling contractors, rental companies and geothermal energy producers. The businesses included in this segment are Drilling Systems, Surface Systems, Subsea Systems and Flow Control.
Drilling Systems is a global supplier of integrated drilling systems for onshore and offshore applications. Drilling equipment designed and manufactured includes ram and annular BOPs, control systems, drilling risers, drilling valves, choke and kill manifolds, diverter systems, top drives, draw works, mud pumps, other rig products and aftermarket parts and services. The products are marketed under the Cameron, Guiberson, H&H CUSTOM, H&H, Melco, LeTourneau, Lewco, OEM and Townsend brand names. Surface Systems is a global market in supplying surface production equipment, from conventional to high-pressure, high temperature (HPHT) wellheads, production systems and controls, block valves, gate valves, mudline systems, dry completion systems and aftermarket parts and services. The products are marketed under the Cameron, Camrod, IC, McEvoy, Precision, SBS, Tundra, Willis and WKM brand names. Cameron, which has a global base of installed equipment and an aftermarket presence in hydrocarbon-producing region worldwide, is the provider of surface production equipment. Surface Systems added new s! ales and ! aftermarket facilities in the Marcellus, Eagle Ford and Haynesville shale regions.
Subsea Systems is a provider of subsea wellheads, production systems and controls, manifolds and aftermarket parts and services to customers worldwide, from basic subsea tree orders to integrated solutions, as well as installation and aftermarket support. These products are marketed under the Cameron, Mars, McEvoy and Willis brand names. Flow Control provides chokes, actuators, gears, valve accessories and automation solutions to other Cameron businesses, as well as to other industry manufacturers and directly to end users under such brand names as Cameron, Dynatorque, Ledeen, Maxtorque, Test and Willis. Flow Control has expanded its subsea chemical injection metering valve (CIMV) product line, introducing a high-flow CIMV.
Valves & Measurement Segment
Cameron�� products include gate valves, ball valves, butterfly valves, Orbit valves, double block & bleed valves, plug valves, globe valves, check valves, actuators, chokes and aftermarket parts and services, as well as measurement products such as totalizers, turbine meters, flow computers, chart recorders, ultrasonic flow meters and sampling systems. This equipment and the related services are marketed through a worldwide network of combined sales and marketing employees, as well as distributors and agents in selected international locations. Customers include oil and gas majors, independent producers, engineering and construction companies, pipeline operators, drilling contractors and major chemical, petrochemical and refining companies. The businesses included in this segment are Distributed Valves, Engineered Valves, Process Valves, Measurement Systems and Aftermarket Services.
Distributed Valves provides a range of valves used in the exploration, production and transportation of oil and gas, with products sold through a network of wholesalers and distributors, primarily in North America and to upstream markets in A! sia-Pacif! ic and the Middle East. These valves are marketed under the brand names Cooper, Demco, Navco, Newco, Nutron, OIC, Techno, Texstream, Thornhill Craver, Wheatley and WKM. Engineered Valves provides a range of customized ball, gate and check valves serving the oil and gas production, pipeline, subsea and liquefied natural gas (LNG) markets. Products are marketed under the brand names Cameron, Entech, Grove, Ring-O, TK and Tom Wheatley.
Process Valves provides valves under the brand names of General Valve, Orbit, TBV and WKM for use in critical service applications that are often subject to extreme temperature conditions, particularly in refinery, power generation, including nuclear, chemical, petrochemical, gas processing and liquid storage terminal markets, including liquefied natural gas (LNG). Measurement Systems designs, manufactures and distributes measurement products, systems and solutions to the global oil and gas, process and power industries. The Company�� main product brand names include Barton, Caldon, Clif Mock, Jiskoot, Linco, Nuflo and PAAI. Aftermarket Services provides preventative maintenance, original equipment manufacturer (OEM) spare parts, repair, field service, asset management and remanufactured products for valves and actuators.
Process & Compression Systems Segment
Integrally geared centrifugal compressors are used by customers worldwide in a range of industries, including air separation, petrochemical, chemical and process gas. Products include oil and gas separation equipment, heaters, dehydration and desalting units, gas conditioning units, membrane separation systems, water processing systems, integral engine-compressors, separable reciprocating compressors, two and four-stroke cycle gas engines, turbochargers, integrally-geared centrifugal compressors, compressor systems and controls. Aftermarket services include spare parts, technical services, repairs, overhauls and upgrades. The businesses included in this segment are Process System! s, Recipr! ocating Compression and Centrifugal Compression.
The process systems businesses provide custom-engineered process packages to oil and gas majors, national oil companies, independent operators and engineering, procurement and construction companies worldwide for separation and treatment of oil, gas, water and solids. Products offered include separators, heaters, dehydration and desalting units, gas conditioning units, membrane separation systems, water processing systems and aftermarket parts and services. PCS markets its process systems products under the Cameron, Consept, Cynara, Hydromation, KCC, Metrol, Mozley, NATCO, Petreco, Porta-test, Unicel, Vortoil and Wemco brand names.
Reciprocating Compression equipment is used throughout the energy industry by gas transmission companies, compression leasing companies, oil and gas producers and independent power producers. Reciprocating Compression products and services are marketed under the Ajax, Cooper-Bessemer, CSI, Enterprise, Superior, Texcentric and TSI brand names. Ajax integral engine-compressors, which combine the engine and compressor on a single drive shaft, are used for gas re-injection and storage, as well as on smaller gathering and transmission lines. Superior-brand separable compressors are used for natural gas applications, including production, storage, withdrawal, processing and transmission, as well as petrochemical processing. These high-speed separable compressor units can be matched with either natural gas engine drivers or electric motors. Reciprocating Compression also provides global support for its products and maintains sales and service offices in key international locations. During 2011, approximately 60% of the Reciprocating Compression revenues were generated by sales of aftermarket parts and services in support of the Company�� worldwide installed base of compression equipment. Customers for Reciprocating Compression products include oil and gas majors, national oil companies, petrochemical and re! fining co! mpanies, midstream natural gas companies, independent power producers and compressed natural gas distribution companies.
Centrifugal Compression manufactures and supplies integrally geared centrifugal compressors and provides aftermarket services to customers worldwide. Centrifugal air compressors, used in manufacturing processes (plant air), are sold under the Turbo-Air. Engineered compressors are used in the process air and gas industries and are identified by the MSG. The process and plant air centrifugal compressors deliver oil-free compressed air and other gases to customers, thus preventing oil contamination of the finished products. Centrifugal Compression also provides installation and maintenance services, parts, repairs, overhauls and upgrades to its worldwide customers for plant air and process gas compressors. It also provides aftermarket service and repairs on all equipment it produces through a worldwide network of distributors, service centers and field service technicians utilizing an extensive inventory of parts marketed under the Joy brand name. Centrifugal Compression customers include oil and gas majors, national oil companies, air separation companies, independent power producers, petrochemical and refining companies, midstream natural gas companies and durable goods manufacturers.
The Company competes with Aker Solutions, Balon Corporation, Circor International, Inc., Dover Corporation, Dril-Quip, Inc., Emerson Process Management, FlowServ Corp., FMC Technologies, Inc., GE Oil & Gas Group, Stream-Flo Industries Ltd., National Oilwell Varco Inc., Zy-Tech Global Industries company, Flotek Industries, Inc., Pibiviese, Robbins & Myers Fluid Management Group, SPX Corporation�� Flow Technology Segment, Tyco International Ltd., Weatherford, Ltd., Ariel Corporation, Compressor Engineering Corporation, Demag, Dresser-Rand Company, FS-Elliott Company LLC, Endyn Energy Dynamics, Hoerbiger Group and IR Air Solutions.
Advisors' Opinion:- [By Benjamin Shepherd]
Why is there such a disconnect between oil and gasoline prices? Despite the fact that oil and gasoline make just about everything go and demand has been steadily rising for decades now, oil production has had difficulty keeping pace. And since 2005 most production growth has come from the increased exploitation of shale formations and hydraulic fracturing.
Since 2005, global production of crude oil has grown by 2.3 million barrels per day (MBPD) and over that same time period U.S. production of shale oil has grown by 3.5 MBPD. Not only is the U.S. essentially responsible for all the production global production growth since 2005, it has also made up from 1.2 MPBD of lost production elsewhere in the world.
While the gasoline price spike since October can be largely attributed to seasonal factors ��traveling increases in the holiday and summer seasons ��tight global oil production could result in higher gasoline prices becoming a fact of life. Here in the U.S. nearly 75 percent of the oil we consume goes to transportation and higher gasoline and other distillate prices are the only effect mechanism for rationing it.
That pricing mechanism, coupled with rapid advancements in drilling technologies and know-how, has also made it economical to produce once-untouchable oil reserves, such as those in deepwater or in shale formations and oil sands. It has also driven a huge push to increase global oil production in the coming years and created an opportunity to not only profit from the energy boom but also hedge your portfolio against the damaging impact of energy inflation.
One interesting play on that theme is Cameron International (NYSE: CAM). Cameron provides separation and pressure control equipment, flow control, compressors, valves and other equipment to the global energy industry, as well as the services to install and maintain it. About 20 percent of its $2.4 billion in first quarter revenue was generated through equipment and serv - [By David Smith]
Cameron International� (NYSE: CAM )
As with many oil-field service companies, Houston-based Cameron International is the survivor of several mergers. Today, Cameron manufactures a host of valves, pumps, wellheads, risers and other equipment used in drilling and production. Perhaps more importantly, it makes components for land and offshore rigs, along with subsea production systems and all-important blowout preventers.
Top 5 Japanese Companies To Watch In Right Now: Market Vectors Brazil Small-Cap ETF (BRF)
Market Vectors Brazil Small-Cap ETF (the Fund) seeks to replicate as closely as possible the price and yield performance of the Market Vectors Brazil Small-Cap Index (the Index). The Index is a rules-based, modified market capitalization-weighted, float-adjusted index consisting of publicly traded small-capitalization companies that are domiciled and primarily listed on an exchange in Brazil, or that generate at least 50% of their revenues in Brazil. The Index is the exclusive property of 4asset-management GmbH, which has contracted with Standard & Poor��, a division of The McGraw-Hill Companies, Inc. to maintain and calculate the Index. The Fund is passively managed and may not hold each Index component in the same weighting as the Index. The Fund�� investment advisor is Van Eck Associates Corporation. Advisors' Opinion:- [By Jon C. Ogg]
Market Vectors Brazil Small-Cap ETF (NYSEArca: BRF) has performed closely with the larger ETF group, with a drop of almost 4% so far in 2014. By its name, you can assume it tracks small-cap stocks. It aims to track the Market Vectors Brazil Small-Cap Index. At $28.51, its 52-week trading range is $27.99 to $44.17.
- [By Hilary Kramer]
Brasil Foods SA (BRF) is South America�� largest food processing company, involved in everything from meat and dairy products to pasta, frozen vegetables and soybean-related products. The company has been around since 1939, and Forbes ranked it 39th on its list of the world�� most innovative companies. It brings in about $13 billion in sales each year, and analysts are estimating that earnings will grow from 94 cents per share in 2012 to $1.94 for all of 2013, with additional growth to $2.78 in 2014.
No comments:
Post a Comment